Copying A Document - Xerox Document WorkCentre 450c User Manual

Copying a document

You copy a document using the keys on the WorkCentre
control panel. Before copying a document, you can change
the contrast and reduce or enlarge the original. The settings
you choose are used for the document you are copying.
After you've made the copies, the WorkCentre returns to its
default copy settings.
When you copy a document, the WorkCentre stores the
document to memory and then prints the copies. If the
memory becomes full while copying, the WorkCentre stops
scanning and copies the pages already stored to memory.
To free up WorkCentre memory, delete any documents
stored to memory or make single copies of your document.
1. At the WorkCentre 450c, load up to 20 pages face
down in the document tray.
2. Press the COPY key.
3. To make more than one copy, enter the number of
copies using the numeric keypad.
To change the number you entered, press EXIT/
CLEAR and enter a new number.
201