Xerox Document WorkCentre 450c User Manual page 109

6. To include a charge code with the fax number, do one
of the following:
• Click Enter now. Type your charge code in the
Enter charge code box and click OK. The charge
code displays as a series of vertical bars (|) and is
entered automatically when you use the speed dial
number.
• Click Enter later. The letter "C" displays at the end
of the fax number. The WorkCentre will prompt you
to enter the charge code at the control panel when
you use the speed dial number to send a fax.
Note When sending or distributing a fax to a
Phonebook group, the WorkCentre prompts you once
to enter a charge code. The charge code you enter is
used for all the other speed dial entries in the group
that you set up with this feature.
7. If you want to specify a delayed start time or a
maximum fax speed, click Use extra features and do
one or both of the following:
• To send faxes at a specific time, click Dial later. In
the box, type the time using the format for either a
12- or 24-hour clock.
109