Xerox Document WorkCentre 450c User Manual page 86

7. Load up to 20 pages face down in the document tray.
8. Begin dialing the fax number.
9. When you need to switch to touch-tone dialing, press
the PAUSE key to display the dial options.
10. Press the RIGHT ARROW key twice to display [tone
dialing] and then press ENTER. The letter "T"
displays on the LCD, which indicates that the next
number you enter will use touch-tone dialing.
11. Enter the next fax number.
12. Do one of the following:
• Press START to begin the fax transmission.
• Press ENTER, add another fax number, and then
press START.
Note After the fax is sent, you may want to change
the PAUSE key setting to pause only . Repeat steps
1 through 5 and choose pause only in step 5.
86