Xerox Document WorkCentre 450c User Manual page 77

3. To print a confirmation report after the fax is sent,
press the CONFIRM key to display [yes] and then
press ENTER.
4. Press the CONTRAST key several times to switch
among these options:
Normal
Lighten
Darken
Photo normal For photographs and documents that contain
Photo lighten For photographs and grayscale documents
Photo darken For photographs and grayscale documents
When you choose a photo setting, the WorkCentre
automatically sets the resolution to fine if it was
previously set to standard.
5. Press the RESOLUTION key several times to switch
among these options:
Standard
Fine
Superfine
For documents with good dark and light values.
For documents that are too dark.
For documents that are too light.
different shades of gray.
that are too dark.
that are too light.
200 x 100 dots per inch.
200 x 200 dots per inch.
300 x 300 dots per inch.
77