Abs; Filter - Rigol DS1000Z-E Series User Manual

RIGOL

Abs

Calculate the absolute value of the selected source and display the results.
Press MATH  Math  Operator to select "Abs":
Press Operation to enable or disable the "Abs" operation function.

Press Source to select the desired channel (CH1, CH2, or fx (please refer to the

introduction in "Fx Operation")).
Press Offset and use

Press Scale and use

Press Scale Reset to adjust the vertical scale of the operation results to the

optimal value according to the current configuration.
Press Options to set the start and end points of the operation results, enable or

disable waveform invert, etc.
― Press Start and use
― Press End and use
― Press Invert to enable or disable the inverted display function of the
― Press Auto Scale to enable or disable the auto scale function. When auto
― Press fx Operator, fx A and fx B to set the operator and signal sources of
Note:
differential operation.
You can also use HORIZONTAL

SCALE to adjust the horizontal position and scale of the operation results.

Filter

DS1000Z-E provides 4 types of filters (Low Pass Filter, High Pass Filter, Band Pass
Filter and Band Stop Filter). The specified frequencies can be filtered by setting the
bandwidth.
Press MATH  Math  Operator to select "Filter":
Press Operation to enable or disable the "Filter" operation function.

Press Source to select the desired channel (CH1 or CH2).

Press Offset and use

Press Scale and use

6-20
Find Quality Products Online at:
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
to set the end point of the operation results.
waveform.
scale is enabled, the instrument will adjust the vertical scale of the
operation results to the optimal value according to the current
configuration.
the inner layer operation of Fx operation (please refer to the introduction in
"Fx Operation").
Smooth is grayed out and disabled. Smooth is only available for
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
GlobalTestSupply
www.
Chapter 6 MATH and Measurement
to set the start point of the operation results.
POSITION and HORIZONTAL
DS1000Z-E User Guide
.com
sales@GlobalTestSupply.com