Lenovo System x3850 X6 Installation And Service Manual page 592

1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
Related links
– Server features and specifications
• 80070101-0b06ffff : Sensor [SensorElementName] has transitioned from normal to non-critical
state.
PCI 6 temperature has risen above the critical level, causing a hard shutdown of the node.
May also be shown as 800701010b06ffff or 0x800701010b06ffff
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0520
User Response
Complete the following steps:
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
Related links
– Server features and specifications
• 80070101-2c01ffff : Sensor [SensorElementName] has transitioned from normal to non-critical
state.
The ML2 Card has reported a non-critical Over temperature condition.
May also be shown as 800701012c01ffff or 0x800701012c01ffff
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - Temperature
SNMP Trap ID
578
System x3850 X6 and x3950 X6 Installation and Service Guide