Lenovo System x3850 X6 Installation And Service Manual page 347

Hide thumbs Also See for System x3850 X6:

Table of Contents

To replace the right EIA bezel, complete the following steps.

1. Pull the IBM right EIA bezel forward; then, remove the bezel from the server.

2. Position the secure the Lenovo right EIA bezel on the server; then, press it fully into place.

Replace the IBM system labels with Lenovo system labels.

Be careful when sliding the server forward to attach the new agency label. Moving the

server too far forward can cause the rack to tip or the server to fall out of the rack.

1. Slide the server forward in the rack.

Removing and replacing components

Troubleshooting

System x3950 x6 6241