Step 5.
Disconnect the flash power modules cables from the adapters and remove the flash power
modules from the air baffle.
Step 6.
Rotate the air baffle up, then push outward on both sides of the air baffle to disengage it from the I/
O book and set it aside.
Step 7.
If you are instructed to return the module, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing the standard I/O book air baffle
Use this information for instructions on how to replace the standard I/O book air baffle.
The air baffle is located in the standard I/O book. To install the air baffle, complete the following steps:
232
System x3850 X6 and x3950 X6 Installation and Service Guide