E1000 Front Panel
E1000 Back Panel
The Talari E1000 may be ordered with three different hardware options. Installation will vary based on which E1000 hardware option
is being deployed. Each E1000 hardware option can be visually identified by comparing the back of the appliance to the E1000 back
panel images below. Where necessary, separate sub-sections for each hardware option are provided within this guide.
E1000: No Expansion Card
Power
Power: A/C Power Connector
Fan: Fan exhaust
Port 1: Gigabit Ethernet (Bypass pair with Port 2)
Port 2: Gigabit Ethernet (Bypass pair with Port 1)
Port 3: Gigabit Ethernet (Bypass pair with Port 4)
Port 4: Gigabit Ethernet (Bypass pair with Port 3)
Console: DB9 console port (115200/8-N-1)
USB ports (4): For connecting keyboard and mouse
MGT: Management port
AUX: Auxiliary management port, used for Manual Install
VGA Port: For connecting a monitor
–
Ports 5
8: Gigabit Ethernet ports (non-bypass)
Serial Number Sticker: Used for Easy 1
Version 1.1
Fan
USB Ports
Console
MGT
st
Install
Thumb Screws
Port 1
Port 2
Port 3
AUX
VGA
Port 5
Port 4
Port 6
Port 7
Port 8
Serial Number Sticker
5