Table of Contents
Advertisement
E1000 with 10G Fiber Expansion Card:
Port 9 Port 10
Port 9: 10 Gigabit Ethernet (non-bypass)
Port 10: 10 Gigabit Ethernet (non-bypass)
Note: Ports 9 and 10 should only be configured with Bypass Mode set as Fail-to-Block. The 10G Fiber expansion card does not support
Fail-to-Wire, and the Talari service will not start if a configuration specifying Fail-to-Wire for these ports is applied to an E1000 with 10G
expansion card.
Version 1.1
2 0
Advertisement
Table of Contents
