Table of Contents
Advertisement
4. Locate the Site name of the E1000 being deployed.
13. Click the Edit pencil
14. Enter the serial number of the E1000 being deployed and click the Set Serial Number button. (Refer to Page 4 for assistance
locating the serial number.)
15. Observe the Upload/Activate column. Click the Upload/Activate text when it appears.
16. Continue to observe the Upload/Activate column. Once the text reads Upload Complete, proceed to the next section.
Deploy the Talari Appliance:
17. Ensure that the appliance management interface is cabled for Internet connectivity.
18. Connect the power cord to the E1000. Connect the other end to an appropriately grounded power source. The E1000 will
power on automatically.
19. The E1000 will begin the Easy 1
NCN Web Console, observe the Manage Network > Appliance Installation page for status updates during installation.)
st
20. Once the Easy 1
Install process has completed, the Talari service will automatically be enabled.
Version 1.1
to open the Set Serial Number window.
st
Install process. Please allow up to ten minutes for the process to complete. (From the
18
Advertisement
Table of Contents
