Hand Curl Tube - Mitsubishi RV-3SJ Series Standard Specifications Manual

(6) Hand curl tube

■ Order type: One set
Two sets
Three sets :1E-ST0406C
Four sets
■ Outline
■ Configuration
Table 2-22 ： Configuration equipment
Part name
Hans curl tube (One set: 2 pcs.)
Hans curl tube (Two set: 4 pcs.)
Hans curl tube (Three set: 6 pcs.)
Hans curl tube (Four set: 8 pcs.)
■ Specifications
This option can be installed on clean-type, but its cleanliness is not under warranty.
Table 2-23 ： Specifications
Item
Material
Size
(Tooling side)
Fig.2-14 ： Outline dimensional drawing
[Caution] This option can be installed on clean-type, but its cleanliness is not under warranty.
:1E-ST0402C
:1E-ST0404C
:1E-ST0408C
The hand curl tube is a curl tube for the pneumatic hand.
Type
1E-ST0402C
1E-ST0404C
1E-ST0406C
1E-ST0408C
Specifications
Urethane
Outside diameter: φ4 x Inside diameter: φ2.5
Qty. Mass(kg)
1 pc. 0.1 Φ4 tube, 2pcs.
1 pc. 0.1 Φ4 tube, 4pcs.
1 pc 0.1 Φ4 tube, 6pcs.
1 pc. 0.1 Φ4 tube, 8pcs.
２ Robot arm
Remarks
(Robot side)
Options 2-34