Equipment Application; Instruction Content - ABB Platinum standard Series Product Instruction

EQUIPMENT APPLICATION

INSTRUCTION CONTENT

Introduction
Description and
WBPEEUI110504A0
Dual Cover Housing. Immune to RFI (radio frequency
interference).
Reduced Installation and Service Costs. Remote communi-
cations, modular plug-in electronics, and long-term stability
reduce installation and service time.
Direct Replacement
Transmitters. Transmitters used in the analog mode replace
most four to 20-milliampere output pressure transmitters that
operate over a two-wire system.
Digital Field Bus Compatibility. When used as a high speed
digital communicating device, analog signal processing does
not occur. This results in an overall accuracy that is improved
by more than three times compared to a traditional analog sys-
tem. Such applications are INFI 90
Transmitter Diagnostics. The transmitter performs a series
of self-checks, monitoring such areas as configuration integ-
rity and input circuitry. Two user-defined cell temperature
alarms are available. These diagnostics reduce troubleshoot-
ing and service time.
Agency Certifications. Designed to comply with FM (Factory
Mutual) and CSA (Canadian Standards Association) certifica-
tions as intrinsically safe, explosionproof, and nonincendive.
Selected transmitters may be supplied with CENELEC (Euro-
pean Committee for Electrotechnical Standardization) or SAA
(Standards Association of Australia) certifications on special
order. A NEMA 4X and IP67 housing makes the transmitter
suitable for corrosive environments. The standard electronics
housing is made of a low copper (less than one percent) Alumi-
num alloy. A polyurethane coating on the housing provides
environmental protection.
Uses for the transmitter include process control applications
in the power generation, gas, water, petroleum, pulp and
paper, and food industries.
This instruction is organized into nine sections.
Describes this instruction and the transmitter. Includes refer-
ence documents, nomenclature, specifications, and options
and accessories.
Describes the functional operation of the transmitter and
Operation
associated equipment. It also includes information about spe-
cial applications such as the function generator.
INTRODUCTION
of Existing Analog
®
OPEN supported.
EQUIPMENT APPLICATION
Two-Wire
1 - 3