SUPPORT SERVICES
Cell and Characterization Board Assembly Replacements
Example 1:
Example 2:
TRAINING
TECHNICAL DOCUMENTATION
TRAINING
9 - 18
To order compensated spare or replacement cell and charac-
terization board assemblies:
1. Obtain the first seven characters of the transmitter nomen-
clature from the nameplate.
2. If position 5 contains a D or G, replace it with a 5. If posi-
tion 5 contains an A, replace it with a 6.
3. Add an A1 to the end to complete the nine-position
nomenclature.
A replacement cell with characterization board assembly is required for a
Type PTSDDC1221A11A2 pressure transmitter.
1. The first seven characters of the transmitter nomenclature
are PTSDDC1.
2. Since position 5 contains a D, it is replaced with a 5, yield-
ing PTSD5C1.
3. Adding an A1 to the end results in the nine-position
nomenclature for the compensated spare or replacement cell
with characterization board assembly PTSD5C1A1.
A replacement cell with characterization board assembly is required for a
Type PTSDAFABB1B01RG pressure transmitter.
1. The first seven characters of the transmitter nomenclature
are PTSDAFA.
2. Since position 5 contains an A, it is replaced with a 6,
yielding PTSD6FA.
3. Adding an A1 to the end results in the nine-position
nomenclature for the compensated spare or replacement cell
with characterization board assembly PTSD6FAA1.
Bailey Controls Company has a modern training facility avail-
able for training your personnel. On-site training is also avail-
able. Contact a Bailey Controls Company sales office for
specific information and scheduling.
Additional copies of this product instruction, or other Bailey
Controls Company instructions, can be obtained from the
nearest Bailey Controls Company sales office at a reasonable
charge.
WBPEEUI110504A0