Compliance With Pressure Equipment Directive (97/23/Ec) - ABB 265GS Operating Instruction

1.8.1

Compliance with Pressure Equipment Directive (97/23/EC)

Devices with PS > 200 bar (20 MPa)
Devices with a permissible pressure of PS > 200 bar (20 MPa) have been tested for conformity
by the Technical Supervisory Association TÜV NORD (0045) in accordance with module H and
can be used for fluids of group 1 (PED: 1G).
The name plate bears the following identification codes:
Fig. 3
1 PED: 1G (at PS > 20 MPa)
Devices with PS  200 bar (20 MPa)
Devices with a permissible pressure of PS  200 bar (20 MPa) conform to Sec. 3 Para. (3) and
have not been tested for conformity. The devices have been constructed and manufactured
according to sound engineering practice (SEP).
The CE marking on the device does not refer to the Pressure Equipment Directive.
The name plate thus bears the identification code PED: SEP.
IM/265Gx/Ax-EN-07
Type 265GS VEBNB1
Opt. E1L1B2CBCLH3
S/N 265GS6502016232
PED: 1G
10,5 ... 30 V DC
Mat. 1.4404(8)/ AU/Hast.C
-1 ...+600 bar
1
eing./adj. +0.00 ... +50.000 bar
II 1/2G Ex ia IIC T6
II 1D Ex iaD 20 T50°C or T95°C
Ta = -40°C to +40°C
ZELM 01 ATEX 0064
Electr. Data see EC-Type-Examination Certificate
TAG: -/-
SEP (at PS  20 MPa)
D-32425 Minden
/M 100%/+
HART
SW xx
Bj./Yr. 20xx
PS: 600 bar IP 67
4 ... 20 mA
min.Span 6.0 bar
+0.00 ... +50.00 bar
or T4
or +85°C
2 CE 0045: Identification number of the
notified body with reference to the
Pressure Equipment Directive (for
PS > 20 MPa only)
265Gx, 265Ax
0045
SIL
2
0%/-
/ L
0044
Safety
2
M00077
11