F1 Key; Configuration Lockout Procedure - ABB Platinum standard Series Product Instruction

F1 Key

CONFIGURATION LOCKOUT PROCEDURE

WBPEEUI110504A0
The Type STT terminal allows configurations to be copied to
and from Type STC cartridges. Multiple configuration copies
overwrite existing configurations on the terminal or cartridge,
regardless of the amount of memory space available. Perform
this function by pressing the F1 key on the Type STT terminal.
Refer to the Type STT Smart Transmitter Terminal
Instruction for more information.
The Type PTSD pressure transmitter has a lockout feature.
When engaged, configuration and calibration information is
unalterable. This has no effect on the monitoring of transmit-
ter functions. Refer to Figure
on the amplifier assembly.
1. Remove power from the transmitter.
2. Remove the left housing cover (Fig. 2-1) from the
transmitter.
3. If there is an optional indicator, remove the four indicator
screws (Fig. 8-1) and unplug it from the amplifier assembly. If
there is no optional indicator, skip to Step 4.
4. Use needle nose pliers to change the jumper position. Posi-
tion B locks the configuration and Position A enables
configuration.
5. Reverse this procedure to put the transmitter back into
service.
CONFIGURATION LOCKOUT PROCEDURE
OPERATING PROCEDURES
5-1 for the location of the jumper
5 - 7