Connection - WAGO 767-1501 Quick Start Manual

3

Connection

Exposed connections!
If connections have not been closed with protective covers, liquid or dirt can
penetrate the fieldbus coupler and ruin it. Close all unneeded connections with
protective caps to ensure that IP 67 degree of protection is provided.
Then tighten the connector by hand when power is switched off. Using
mechanical means to tighten it may strip the threads. In such a case, the fieldbus
coupler is to be replaced.
Tightening torques for the connectors: 0.6 Nm
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen
NOTICE
Connection 13