Table of Contents
Advertisement
26
WAGOframe
3.
The following page will be displayed. Execute all five installation programs
one after the other to install the configuration software.
Installation of the USB driver 759-922 is not required if this driver has already
been installed via "CoDeSys 3" setup. Any USB driver that is already installed
will then be updated.
If an older version of "WAGOframe" is installed, this must first be de-installed
with the installation routine. The same applies to DTMs.
Note
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen
Advertisement
Table of Contents
