Plc Configuration In Codesys; Configuring The Fieldbus Node - WAGO 767-1501 Quick Start Manual

20

PLC Configuration in CoDeSys

4 PLC Configuration in CoDeSys
4.1

Configuring the Fieldbus Node

After opening the PLC configuration, insert the CAN master. To show the CAN
module selection in the configuration, it is important that "Support for DSP301
V4.01 and DSP306" is selected in the CAN parameters of the master:
1. Right-click on "CanMaster" and select "Append Subelement" from the context
menu. Select "WAGO 767-1501."
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen