5.3.4
Electrical connection
with single connectors
Single connectors (1) are used for electrical
connection at the solenoid pilot valves (see
Fig. 10 and Fig. 11).
Preferably use connecting lines with mini-
mum 0.5 mm² conductor cross-section and 4
to 8 mm outside diameter.
The degree of protection IP 40 (according to
IEC 60529: 1989) is only guaranteed when
the cable socket is mounted properly with the
seal underneath it.
EB 3965 EN
Legend
1 Single connector according to
EN 175301-803
Fig. 10: Electrical connection with single
connectors
Y1 to Y16
–
2
Fig. 11: Wiring diagram for single connector
Mounting and start-up
+
1
37