Table of Contents
Advertisement
NOTICE
!
Prior to assembly, check that the O-rings (3
and 4) and seal with restriction (5) are seat-
ed correctly on the poppet valve flange.
6. Place the cable socket on the metal con-
tacts of the solenoid pilot valve and se-
cure it using the fastening screw.
NOTICE
!
Prior to assembly, check that the gasket is
seated correctly on the solenoid pilot valve.
7. Switch on the power supply.
EB 3965 EN
Legend
1 Holder
2 Self-tapping screw 2.5x10
3 O-ring 8x1.5
4 O-ring 2x1
5 Seal with restriction
Fig. 18: Solenoid pilot valve with single
connector
Servicing
43
Advertisement
Table of Contents
