Table of Contents
Advertisement
Design and principle of operation
3.1 Accessories
Order no.
Accessories
0790-6658
Cable socket according to DIN EN 175301-803, type C, made of black polyamide,
with cable gland Pg 9
(for 4 to 8 mm cable diameter) and seal of nitrile butadiene rubber
Connecting cable with M12x1 round connector, five-pole, at both ends
8831-...
(for electrical connection module for PROFIBUS-DP and input module for NAMUR sen-
sors)
8831-0873 – 0.3 m long
8831-0874 – 1.0 m long
Low mounting bracket set consisting of 2 mounting brackets and 6 cap screws
1400-9321
ISO 4762 – M5x6
High mounting bracket set consisting of 2 mounting brackets and 6 cap screws
1400-9322
ISO 4762 – M5x6
0790-6123
M5 male connector, brass, for 4x1 mm hose (for test connector)
8582-1450
G
male connector, brass, for 4x1 mm hose (for output connections)
1
/
8
8582-1684
G ¼ male connector, brass, for 9x3 mm hose (for pilot supply connection)
8395-0040
Hose clamp Ø10 to 16 mm (for 9x3 mm hose)
8414-0136
Seal 10x13x1.5 mm, polyvinyl chloride (for G
8414-0140
Seal 13.5x17x1.5 mm, polyvinyl chloride (for G ¼ male connector)
8504-0066
Filter G ¼ (for exhaust port)
Order no.
Accessories
3964-...
Type 3964 Solenoid Pilot Valve u T 3964
3964-XXX000300010 for single connector
3964-X1X000100010 for common cable, multi-pole connector or bus connection for
PROFIBUS-DP (Ex ia)
Poppet valve and accessories
1400-9392
3/2-way poppet valve, including mounting accessories
1400-9393
5/2-way poppet valve, including mounting accessories
1400-9395
Connecting plate G
0550-0189
Filter (for pilot duct in poppet valve)
Interface base between module and poppet valve
0430-1725
Turnable gasket for 3/2-way and 5/2-way function
0430-1956
Turnable gasket for 2/2-way
0430-1761
Molded seal for pilot supply for solenoid pilot valve
16
, including mounting accessories
1
/
8
male connector)
1
/
8
EB 3965 EN
Advertisement
Table of Contents
