Samson 3965 Mounting And Operating Instructions page 59

Solenoid valve island
Table of Contents

Advertisement

Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
EC TYPE EXAMINATION CERTIFICATE
(1)
(2)
Equipment and Protective Systems Intended for Use in Potentially
Explosive Atmospheres – Directive 94/9/EC
(3)
EC Type Examination Certificate Number
(4)
Equipment:
(5)
Manufacturer:
(6)
Address:
(7)
This equipment and any acceptable variation thereto are specified in the schedule to this certificate
and the documents therein referred to.
(8)
The Physikalisch-Technische Bundesanstalt, notified body number 0102 accordance with Article 9
of the Council Directive 94/9/EC of 23 March 1994, certifies that this equipment has been found to
comply with the essential health and safety requirements relating to the design and construction of
equipment and protective systems intended for use in potentially explosive atmospheres as specified
in Annex II to the Directive.
The examination and test results are recorded in the confidential Assessment and Test
PTB Ex 10-28235
(9)
Compliance with the essential health and safety requirements is ensured by compliance with:
EN 60079-0:2006
EN 60079-11:2007
(10) If the sign "X" is placed after the certificate number, it indicates that the equipment is subject to
special conditions for safe use as specified in the schedule to this certificate.
(11) This EC Type Examination Certificate relates only to the design and construction of the specified
equipment or protective system in accordance with Directive 94/9/EC. Further
The results laid down in this test report refer exclusively to the test object and the technical documentation submitted. Test reports without signature
and seal are invalid. This test report may be reproduced unaltered only. Extracts or amendments shall require the prior approval of the Physikalisch-
Ptb57-3965 PA.doc
EB 3965 EN
T R A N S L A T I O N
PTB 09 ATEX 2033
Type 1170-3184 CPU Module and Type 1170-3185 NAMUR Module
for Type 3965-1131 Solenoid Valve Island (PROFIBUS DP)
SAMSON AG, Mess- und Regeltechnik
Weismüllerstrasse 3, 60314 Frankfurt am Main, Germany
Technische Bundesanstalt.
Physikalisch-Technische Bundesanstalt – Bundesallee 100 - D 38116 Braunschweig
EN 61241-0:2006
EN 61241-1:2004
Page 1/5
59

Advertisement

Table of Contents
loading

Table of Contents