Installing An 4Slidb-S Daughter Board - NEC Aspire S Manual

Installing an 4SLIDB-S Daughter Board:

1. Included with the 4SLIDB-S are four plastic spacers. Place a plastic spacer in each corner of the
PCB. Make sure to attach the spacers on the front of the daughter board so when installed, the com-
ponents are facing the 4SLIU-S PCB.
2. Position the 4SLIDB-S's CN1 connector over the CN5 connector on the 4SLIU-S PCB. Press the
boards together, ensuring the plastic spacers lock in place.
3. Install the 4SLIU-S PCB into the slot.
Aspire S Hardware Manual
Section 2: PCB Installation and Startup
CN1
CN5
4SLIU
Figure 2-10: 8SLIDB-S INSTALLATION
4SLIDB
CN4
Spacers
Section 2: PCB Installation and Startup ◆ 2-23
CN4
2