NEC Aspire S Manual page 35

● Insert the PCB within the guide rail and push the PCB securely into position. After installing all the
PCBs, the PCB retaining bar should be moved back into position and the screws for each of the PCBs
should be tightened.
Screw
Aspire S Hardware Manual
Section 2: PCB Installation and Startup
Hold the corner of
both ends of unit
PCB
Guide rail (bottom)
Figure 2-2: INSERTING PCBS
Section 2: PCB Installation and Startup ◆ 2-3
Connector
Guide rail (top)
Connector in Cabinet
(SLOT3 thru SLOT 8)
PCB
PCB Retaining Bar
2