NEC Aspire S Manual page 110

Section 4: Telephones and Optional Equipment
5.
6.
7.
8.
4-4 ◆ Section 4: Telephones and Optional Equipment
Insert the cable into the proper CN4 or CN5 location while holding down the lock button (holding
down this lock button is easiest with a flat-head screwdriver). Once the cable is in place, release the
lock button.
Refer to the specific function being connected for more detail on 2PGDAD connections.
Cable
CN4, CN5
Figure 4-5: CONNECTING CABLE TO THE 2PGDAD MODULE
Repeat Steps 4 and 5 for any additional connections required.
Replace the cover and tighten the screw to hold the cover in place.
If required for the function being used, insert the RCA connectors into the CN2 (Channel 1) and
CN3 (Channel 2) connectors on the back of the 2PGDAD module.
Figure 4-6: 2PGDAD MODULE CONNECTIONS
Flat-head screwdriver
Press down
CN3
Channel 2
CN2
Channel 1
CN1
(to ESIU port)
Aspire S Hardware Manual
RCA Plugs