Table of Contents
Advertisement
Section 4: Telephones and Optional Equipment
4.
5.
6.
7.
8.
4-28 ◆ Section 4: Telephones and Optional Equipment
Terminate the extension leads to GRN/RED of the modular jack. Terminate the unused leads to the
jack.
Install bridging clips as required.
Plug a modular line cord from the mod jack to the CN1 connector on the 2PGDAD module.
Connect an RCA jack to the audio output(s) on the back of the 2PGDAD module.
The opposite end of this cable is connected to the external music source either directly or by con-
necting to the cross-connect block where the music source is connected.
CPU PCB
CN23
Cross
Connect
Block
Figure 4-19: CPRU CONNECTIONS
RCA Plug
CN2 or CN3
To ESIU PCB
CN1
CN2
CN3
PGDAD Module
Figure 4-20: 2PGDAD CONNECTIONS
Music
Input
Music
Music Source
Relays
Music Source
Aspire S Hardware Manual
Advertisement
Table of Contents
Troubleshooting
