NEC Aspire S Manual page 143

8. Replace the adapter cover and reattach the screw.
9. Connect the opposite end of the cable to the recording device or audio output.
Tape Recorder
OR
Line in
Figure 4-36: CONNECTION FOR
RECORDING ONLY
10. Position the adapter with the connector positioned as shown below.
11. Hook the two plastic prongs into the bottom of the phone.
12. Push the connector into place. The top latch on the top of the adapter should lock into place when it
is properly positioned.
13. Plug the LAN cable and AC adapter cable into the keyset.
the power cord, then any other adapter cables.
Aspire S Hardware Manual
Section 4: Telephones and Optional Equipment
ADA Module
T6
T7
CN2
Figure 4-38: POSITIONING THE ADAPTER
To avoid any hardware problems, when removing the adapter, first unplug the line cord, then
Tape Player
Miniplug
Ear Phone
Figure 4-37: CONNECTION FOR
PLAYBACK ONLY
Section 4: Telephones and Optional Equipment ◆ 4-37
ADA Module
CN2
4