HikRobot CameraLink User Manual page 50

CameraLink Line Scan Camera User Manual
·
 RS-644 Standard Output
The camera adopting RS-422 standard output signal cannot directly connect to RS-644 standard.
When connecting RS-644 standard output, it is required to add a resistance network in camera's
output location. In order to make sure the normal operation of output circuit, it is required to
connect camera's ground signal with external ground signal.
Figure 8-5 Outputting RS-644 Signal
 LVTTL Standard Output
When adopting LVTTL standard as the output signal, the wiring is shown below.
Figure 8-6 Outputting LVTTL Signal
40