Inputting An Image To Sub And Main Individually - Christie LWU900-DS User Manual

Connecting cables
4.2 Connecting signal cables

Inputting an image to Sub and Main individually

1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Intellectual Stack • LAN cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack • Any ports compatible with the signal can be
used. Input the same signal to the two projectors individually.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
(continued)
26
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG