Connecting Signal Cables; Inputting An Image From Main To Sub; Inputting An Image To Sub And Main Individually - Christie LHD720i User Manual

Connecting cables

4.2 Connecting signal cables

There are two methods to input an image to the Sub projector. ( 18, 19 )
- Inputting an image from the MONITOR OUT port on Main to Sub.

- Inputting an image to Sub and Main individually.

Inputting an image from Main to Sub

1.
Connect the MONITOR OUT port on Main
to the COMPUTER IN port on Sub with a
computer cable.
2.
Connect the image output device to one of
the input ports on Main.
NOTES for Intellectual Stack
• COMPUTER IN can be used as the input
port for the Main projector in Intellectual Stack.
Do not use other ports for image input.
- You can input component signals to
COMPUTER IN.
NOTES for Simple Stack
• COMPUTER IN can be used as the input
port for the projector that is connected with a
computer cable at its MONITOR OUT port. If
you want to use other input ports, input the
image to Sub and Main individually.
Inputting an image to Sub and Main individually
1.
Split the output signal from your image device into two with device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Intellectual Stack • LAN cannot be used as the input port on
the Main projector in Intellectual Stack.
NOTES for Simple Stack • Any ports compatible with the signal can be
used. Input the same signal to the two projectors individually.
LWU720i/LHD720i/LWU620i
User's Manual - Instant Stack Guide
LWU620i
Main
Sub
LWU720i/LHD720i
Main
Sub
24
Connection example
in Intellectual Stack
020-001307-01 Rev. 1 (10-2017)