Creating A New Site - GE PM880 Operations & Installation Manual

August 2003

Creating a New Site

Note: Be sure you have entered the necessary setup data
discussed in Chapter 3, Programming Site Data, before
creating and saving a new site.
To create a new site within the Site Manager, press
open the File Menu. Be sure the option New is highlighted, and
then press
[ENTER]
below.
Site 01
A B
I J
Q R
Y Z
6 7
& (
Delete
Figure 4-4: Name Entry Window for a New Site
1. Use the four arrow keys to scroll to the desired letter or
number, and press
2. Repeat this procedure until you have created the desired site
name of up to eight characters. (Press
any unwanted letters or numbers.)
3. When you have finished, press
or [F2] , Cancel, to leave the window without creating a site.
A second screen appears (as shown in Figure 4-5 on page 4-5)
asking if you want to use the currently highlighted site as a
template, with the current display windows, measurements and
programmed data. (To modify the display and measurements,
refer to Chapter 5, Displaying and Configuring Data. To alter
programming data, see Chapter 3, Programming Site Data.)
4-4
. The screen appears similar to Figure 4-4
New Site
C D E
K L M
S T U
0 1 2
-
8 9
)
Cancel
.
[ENTER]
[F3]
[MENU]
F G
N O
V W
3 4
_ @
OK
, Delete, to remove
[F1]
, OK, to confirm the entry,
Creating and Managing Sites
to
H
P
X
5
#