Appendix B - Alarms
Mode
Batch
User selects total volume desired.
Dispense Test
Open A dosing valve, turn on blue light, user opens sampling valve, turn off blue light
when complete.
Open B dosing valve, turn on blue light, user opens sampling valve, turn off blue light
when complete.
Display shows volume of A and B components at end of batch dispense test.
Valve Test
If fluid pressure is not 1000 psi (7 MPa, 70 bar), STOP.
Check for no movement of pumps (stall within 10 seconds).
88
Control Logic
Alarms
--
--
--
--
P1AX, P1BX
F7AX, F7BX
3A2776K