Table of Contents
Advertisement
Quick Links
Instructions - Parts
Simulation XM
™
XM
PFP Display Module
For demonstrating use of the XM and XM PFP displays.
24R904
Simulation XM and XM PFP Display Module
Important Safety Instructions
Read all warnings and instructions in
this manual, in XM manual 312359, and
in XM PFP manual 3A2776. Save all
instructions.
™
and
407061B
EN
r_24c372_3A0024A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Graco Simulation XM
Summary of Contents for Graco Simulation XM
- Page 1 407061B PFP Display Module For demonstrating use of the XM and XM PFP displays. 24R904 Simulation XM and XM PFP Display Module Important Safety Instructions Read all warnings and instructions in this manual, in XM manual 312359, and in XM PFP manual 3A2776. Save all instructions.
-
Page 2: Table Of Contents
Parts ........9 Graco Standard Warranty ....10... -
Page 3: Overview
System Selection The display simulates an XM system when shipped from The simulation display module simulates all functions of Graco. To switch between XM and XM PFP, complete a display module installed on XM and XM PFP propor- the following steps. -
Page 4: Setup Mode Screens
Overview Setup Mode Screens To enter Setup mode during simulation, go to the Alarm Information screen and press the UP arrow. See Operator Command Mode Screens on page 5 for instructions on how to navigate to the Alarm Information screen. NOTE: The Tank Fill screen exists only on an XM PFP system. -
Page 5: Operator Command Mode Screens
Overview Operator Command Mode Screens To enter the Operator Command Mode screens during simulation, go to the Software Versions screen and press the UP arrow. See Setup Mode Screens on page 4 for instructions on how to navigate to the Software Versions screen. NOTE: The Supply screen exists only on an XM PFP system. -
Page 6: Access Auto Display Screens
Access Auto Display Screens Access Auto Display Screens The simulation display module does not communicate 2. Press with fluid control modules when the blue simulation token is installed. Therefore, the USB and Potlife screens cannot be accessed through normal navigation. The USB screen displays automatically. -
Page 7: Potlife Simulation
Access Auto Display Screens Potlife Simulation 6. Exit Setup Mode to access the Potlife screen: Navi- gate to the Version Control screen then press the UP arrow. The Power On/Enter Mode screen dis- The Potlife screen is not available unless the potlife plays. -
Page 8: Test Mode Simulation
Access Auto Display Screens Test Mode Simulation 1. Enable Pump Test or Batch Test. 2. Press Start. The left side A letter will flash. 3. Press . The right side B letter will flash. 4. Press . The Test Result screen will display. NOTE: The fluid weight or volume can then be entered. -
Page 9: Parts
Parts Parts 24R904 Simulation Display Module Ref. Part Description Qty. 288997 CASE, rear, portable display 255727 CASE, front, data module 277463 COVER, access, low level display 121946 SCREW, pan head, #6 x 7/8 in. 113768 SCREW, socket, flat head, M5 x 0.80 x 16 124149 CABLE, can female, transformer, AC to DC... -
Page 10: Graco Standard Warranty
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
Need help?
Do you have a question about the Simulation XM and is the answer not in the manual?
Questions and answers