Graco XM PFP Setup & Operation page 22

Setup
e. For Non-Hazardous Location Models,
Connect heater power cables (e) for the tank
heater and the flush heater to the terminal
blocks. See F
IG
A Tank
Hose B Flush
PS1
e
F . 16
IG
22
. 16.
e
For Hazardous Location Models, Connect heater
power cables (e) for the tanks heater the flush heater to
the terminal blocks. See F
F . 17
IG
4. Connect the fluid circulation return hoses.
- The 1/2 in. circulation hose from the dosing
valve connects to the side of the A tank.
- The 3/8 in. circulation hose from the dosing
valve connects to the side of the B tank.
Systems that will be used for 1:1 mix ratio materials
need to change some fittings and circulation hoses. Use
parts from kit 24X461 (supplied with your machine). See
manual 334939 for instructions.
. 17.
IG
e
e
3A2776K