Power Connector Cable - HP Pavilion 15 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Power connector cable EMI tape
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Display assembly (see
Remove the power connector cable:
1. Make sure the left display hinge is in the open position.
2. Disconnect the power connector cable from the system board (1).
3. Release the cable from the retention clips and routing channel built into the computer and speaker (2).
4. Remove the power connector cable from the computer (3).
Remove the power connector cable on models equipped with GTX graphics:
76 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 35)
Display assembly on page
32), and then remove the following components:
37)
Spare part number
810327-006
L28015-001