Power Connector - HP 240R G9 Maintenance And Service Manual

Wireless antennas and cables are available as spare part number L29012-001 for models with a
single antenna and L24640-001 for models with dual antennas.
14. If replacing the display enclosure, be sure that the subcomponents are transferred to the new
enclosure.
To reassemble and install the display assembly, reverse this procedure.

Power connector

To remove the power connector, use this procedure and illustration.
Table 5-13 Power connector description and part number
Description
Power connector
Before removing the power connector, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
5. Remove the right hinge screw and lift the right hinge (see
Remove the power connector:
1. Disconnect the power connector (1) from the system board.
Preparation for disassembly on page
Rubber feet on page
Bottom cover on page
Battery on page 32).
30).
31).
Display assembly on page
Spare part number
L23188-001
30).
46).
Power connector 53