Preparing For Commissioning - Festo CPX Series Description

3. Commissioning
3.4

Preparing for commissioning

Festo CPX-F8DE-P-EN en 2005b English
1. Ensure that the CPX terminal is mounted correctly
è CPX system description.
2. Check the wiring (connecting cables, contact assignment)
è Chapter 2.2.1.
3. Dismantle the manifold block of the input module
è Chapter 2.3.1.
4. Check the input module is in good condition.
5. Set the PROFIsafe address on the input module with DIL
switches and install the manifold block è Chapter 2.3.2.
3-5