1. System overview CPX-F8DE-P
1.3.3 Details of the function modes
Recommended sensors
Sensors with mechanical switch contacts
Sensors with self-monitored electronic outputs
Electronic three-wire sensors with a ready-state
delay of 23 ms
or
Electronic two-wire sensors with a ready-state
delay of 2 ms
Additionally:
– with reverse polarity protection at the positive
supply port
or
– without free-wheeling diode at the sensor
output.
® Recommended function mode
² Can be used with low safety requirements
Tab. 1/12: Recommended sensors
Festo CPX-F8DE-P-EN en 2005b English
The input module CPX-F8DE-P includes various function
modes for implementation of safety circuits with
recommended sensors. These function modes can be set
separately for each channel pair.
Function mode
1
–
²
–
–
Note
Some function modes may restrict the manifold blocks that
can be selected.
Make sure that the manifold block required for the
safety function is used.
2
3
4
5
6
²
®
®
–
–
²
®
–
–
–
²
²
–
–
–
®
–
–
–
–
7
8
9
10
®
®
®
®
®
®
–
–
²
–
–
–
–
–
–
–
1-21