3. Commissioning
3.7
Reading out the CPX module parameters
Overview of module parameters CPX-F8DE-P
1)
Function number
4828 + m * 64 + 1 ... 5
4828 + m * 64 + 8 ... 21
4828 + m * 64 + 22
4828 + m * 64 + 23
1) Parameters read-only via operator unit and command interpreter (CI).
Tab. 3/4:
Overview – module parameters CPX-F8DE-P
Festo CPX-F8DE-P-EN en 2005b English
Further information on parameterisation can be found in the
CPX system description P.BECPXSYS... or in the description
of the bus node.
The following table provides an overview of the existing
CPX module parameters on the input module.
Bit
Module parameters
0 ... 7
Reserved
0 ... 7
reserved for PROFIsafe
0 ... 7
Position of 10x DIL switch for the
PROFIsafe address of the module, bits 0 ... 7
0, 1
Position of 10x DIL switch for the
PROFIsafe address of the module, bits 8 and 9
Default
–
–
1)
0
1)
0
3-9