Sinamics Integrated Reset To Factory Settings - Siemens SIMATIC S7-1500 System Manual

Maintenance

13.5 SINAMICS Integrated reset to factory settings

Result after resetting to factory settings
The following table provides an overview of the contents of the memory objects after the
reset to factory settings.
Table 13- 2 Result after resetting to factory settings
Memory object
Actual values of the data blocks, instance data blocks
Bit memories, timers and counters
Retentive tags of technology objects
(e.g. adjustment values of absolute encoders)
Entries in the diagnostics buffer
IP address
Device name
Counter readings of the runtime meters
Time of day
If there was a SIMATIC memory card inserted in the CPU prior to the reset to factory
settings, the CPU downloads the configuration on the SIMATIC memory card (hardware and
software). A configured IP address is then valid again.
Further information
Additional information on "Reset to factory settings" can be found in the Function Manual
Structure and use of the CPU memory
(https://support.industry.siemens.com/cs/ww/en/view/59193101) in the section on memory
areas and retentivity, and in the online help for STEP 7.
13.5 SINAMICS Integrated reset to factory settings
Restoring factory settings
In online mode, you can restore the factory settings for SINAMICS Integrated.
1. Establish an online connection to SINAMICS Integrated.
2. Click the
The factory settings are restored.
254
icon in the function view for the active drive.
Contents
Initialized
Initialized
Initialized
Initialized
Depends on the procedure:
Using mode switch: is deleted
•
Using STEP 7: Depending on the setting of the
•
"Keep IP address"/"Delete IP address" option
buttons
Is set to "CPU"
Initialized
Is set to "00:00:00, 01.01.2012"
System Manual, 11/2019, A5E46600094-AA
SIMATIC Drive Controller