Preface
Purpose of the documentation
This documentation provides an overview of the SIMATIC Drive Controller family and
important information on configuring, installing, wiring and commissioning.
Basic knowledge required
A basic knowledge of automation technology is required to understand the documentation.
Scope of the documentation
This documentation applies to all products from the SIMATIC Drive Controller product family.
Conventions
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe notes marked as follows:
Note
Notes contain important information on the product described in the documentation, on
handling the product or on part of the documentation to which you should pay particular
attention.
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA
3