Siemens SIMATIC S7-1500 System Manual page 5

Preface
Special information
Note
Important note for maintaining the operational safety of your plant
Plants with safety-related features are subject to special operational safety requirements on
the part of the operator. Even suppliers are required to observe special measures during
product monitoring. For this reason, we inform you in personal notifications about product
developments and features that are (or could be) relevant to the operation of plants from a
safety perspective.
By subscribing to the corresponding notifications, you will ensure that you are always up-to-
date and able to make changes to your system when necessary.
Log onto Industry Online Support. Go to the following links and right-click on "email on
update":
SIMATIC S7-1500/SIMATIC S7-1500F
(https://support.industry.siemens.com/en/ww/de/ps/13716)
Distributed I/O (https://support.industry.siemens.com/cs/ww/en/ps/14029)
STEP 7 (TIA Portal) (https://support.industry.siemens.com/cs/ww/en/ps/14667)
SINAMICS S120 (https://support.industry.siemens.com/cs/ww/en/ps/13231)
SINAMICS Startdrive (https://support.industry.siemens.com/cs/ww/en/ps/13438)
Operator control and monitoring systems
(https://support.industry.siemens.com/cs/ww/en/ps/14729)
Industrial communication (https://support.industry.siemens.com/cs/ww/en/ps/15247)
Safety engineering – Safety Integrated
(https://support.industry.siemens.com/cs/ww/en/ps/19902)
Note
When using F-CPUs in safety mode and failsafe modules, observe the description of the
SIMATIC Safety - Configuring and Programming
(https://support.industry.siemens.com/cs/ww/en/view/54110126) F system.
Recycling and disposal
For environmentally friendly recycling and disposal of your old equipment, contact a certified
electronic waste disposal company and dispose of the equipment according to the applicable
regulations in your country.
4
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA