Drive Controller-Specific Properties; Drive Controller-Specific Hardware Properties; Drive Controller-Specific Properties Of The Cpu - Siemens SIMATIC S7-1500 System Manual

Software requirements
Table 4- 2
Configuration in the TIA Portal
Integrated SIMATIC S7-1500 CPU
SINAMICS Integrated
Note
Licensing
The S7 controller and SINAMICS Integrated are licensed in the TIA Portal via STEP7
Professional or Startdrive.
4.3

Drive Controller-specific properties

4.3.1

Drive Controller-specific hardware properties

The SIMATIC Drive Controller is part of the SINAMICS S120 drive system and the same
installation conditions and installation rules as for SINAMICS S120 therefore apply.
4.3.2

Drive Controller-specific properties of the CPU

The SIMATIC Drive Controller is optimized for automation solutions with Motion Control in
which SINAMICS S120 high-performance converters are used.
With its extensive field bus interfaces, the SIMATIC Drive Controller is ideal for modular
machine concepts.
Service functions
The SIMATIC Drive Controller does not have an integrated display. You can alternatively run
service functions over the integrated Web server, for example. You can save the service
data to the SIMATIC memory card with the FUNCT key.
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA
Software requirements
4.3 Drive Controller-specific properties
Requirement
SIMATIC STEP 7 Professional V16 or higher
SINAMICS Startdrive Basic or Startdrive Advanced,
V16 or higher
Startdrive Advanced has additional engineering func-
tions compared to Startdrive Basic such as a safety
acceptance test.
Application planning
61