Cpu Reset To Factory Settings - Siemens SIMATIC S7-1500 System Manual

13.4

CPU reset to factory settings

Introduction
"Reset to factory settings" restores the CPU to its delivery state. The function deletes all
information that was stored internally on the CPU.
Recommendation:
Switch the CPU to its as-delivered condition if:
● You remove a CPU and use it elsewhere with a different program
● You store the CPU
When resetting to factory settings, remember that the IP address parameters are also
deleted.
Options for resetting a CPU to factory settings
To reset the CPU to its delivery state, follow these steps:
● Using the mode selector
● Using STEP 7
● Using the SIMATIC Automation Tool
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA
Maintenance
13.4 CPU reset to factory settings
251