Arp Inspection Static Table - Planet IGS-5225 Series User Manual

Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.5.8.2 ARP Inspection Static Table

This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen in
Disabled: Disable ARP Inspection operation.

If you want to inspect the VLAN configuration, you have to enable the setting
of "Check VLAN". The default setting of "Check VLAN" is disabled. When the
setting of "Check VLAN" is disabled, the log type of ARP Inspection will refer
to the port setting. And the setting of "Check VLAN" is enabled, the log type of
ARP Inspection will refer to the VLAN setting. Possible setting of "Check
VLAN" are:
 Enabled: Enable check VLAN operation.
 Disabled: Disable check VLAN operation.
Only the Global Mode and Port Mode on a given port are enabled, and the
setting of "Check VLAN" is disabled, the log type of ARP Inspection will refer
to the port setting. There are four log types and possible types are:
None: Log nothing.

Deny: Log denied entries.

Permit: Log permitted entries.

ALL: Log all entries.

: Click to translate all dynamic entries to static entries.
Figure 4-5-8-2: Static ARP Inspection Table Screen Page Screenshot
User's Manual of IGS-5225 series
382
Figure 4-5-8-2 appears.