Planet IGS-5225 Series User Manual page 389

The page includes the following fields:
Object
• System PoE Admin Mode
• PoE Temperature Protection
• PoE Management Mode
• PoE Legacy Mode
• Power Supply Budget [W]
• Temperature Threshold
• PoE Usage Threshold
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-6-1-2: PoE Configuration Screenshot
Description
Allows user to enable or disable PoE function. It will causes all of PoE ports to supply
or not supply power.
Allows user to enable or disable PoE Temperature Protection.
There are two modes for configuring how the ports/PDs may reserve power and when
to shut down ports.
Classification mode: System offers PoE power according to PD real power

consumption.
Allocation mode: Users are allowed to assign how much PoE power for each

port and system will reserve PoE power to PD.
In the legacy mode, the IEEE method will be tried first and if it fails to discover a valid
PD, the legacy capacitance measurement with a large capacitance value will be used
to detect a legacy PD. This mode is used to support legacy devices. The default mode
is IEEE mode. Enabled legacy mode could damage non-PD devices.
Set limit value of the total PoE port providing power to the PDs.
This is PoE temperature threshold for user set up a temperature parameter for alarm.
This is a parameter for user to define that if PoE power has been consumed to the
setting then a alarm log will be issued.
389
User's Manual of IGS-5225 series