Configuration Download - Planet IGS-5225 Series User Manual

appears.
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the Port State page without resetting the configuration.
To reset the Industrial Managed Switch to the Factory default setting, you can also press the hardware
reset button on the front panel for about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx.

4.9.1.9 Configuration Download

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user has to
re-log in the Web interface about 60 seconds later; the System Reboot screen in
Buttons
: Click to reboot the system.
: Click to return to the Port State page without rebooting the system.
Figure 4-9-1-10: Factory Default Page Screenshot
Figure 4-9-1-11: System Reboot Page Screenshot
434
User's Manual of IGS-5225 series
Figure 4-9-1-11 appears.