Snmp Trap Configuration - Planet IGS-5225 Series User Manual

4.2.2.4 SNMP Trap Configuration

Configure SNMP trap on this page. The SNMP Trap Configuration screen in
Click 'Add New Entry" and then the SNMP Trap Configuration page appears.
The page includes the following fields:
Object
Trap Config
•
• Trap Mode
Trap Version
•
Figure 4-2-2-4: SNMP Trap Configuration Page Screenshot
Description
Indicates which trap Configuration's name for configuring. The allowed string
length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.

Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.

SNMP v2c: Set SNMP trap supported version 2c.

User's Manual of IGS-5225 series
Figure 4-2-2-4
112
appears.