KEY LOCK FUNCTION
This incubator is provided with a key lock function. When the key lock is ON, change of temperature or
density setting through the key pad is not available.
Note: The key lock is set in OFF mode (L0) at the factory.
Procedure for key lock setting (change from key lock OFF to key lock ON)
Description of operation
Press digit shift key for 5 seconds.
Press numerical value shift key
and scroll the figure to 1.
Press enter key.
●The key lock function is available for temperature and CO
● To cancel the key lock, set to L0 in the above procedure.
Key lock is OFF
Enable to change of temperature and CO
Key lock is ON
Disable to change of temperature or CO
Indication after operation
The current chamber temperature and
density are displayed.
L0 is displayed in the temperature
When pressed, the figure of settable
The key lock is set to ON.
The current chamber temperature is displayed.